Network Timing and Synchronization
TesCom Timing and Synchronization now available

TesCom Timing and Synchronization Products

Roadside Cabinet and Hardened Edge Clocks Legacy & Next Generation Network Clocks
32 - 104 Legacy Ports + NTP/IEEE 1588 (10/100/1000BASE-T)
including Grandmaster Clocks
Large Office NEBS-rated Clocks
Hundreds of outputs + NTP/IEEE 1588 (10/100/1000BASE-T)
including Grandmaster Clocks

TesCom offers a range of hardened GPS clocks for field cabinets and "rough service" locations. With extended temperature ranges and just the right number of outputs these clocks are fast becoming the preferred choice as companies transition to packet-based networks.

They are particularly well suited for companies looking for cost effective PTP/IEEE-1588 solutions to support small, remote sites.

The full line of TesCom Timing & Synchronization systems cover every need for combined legacy frequency-based timing (T1/E1, CC, xx kHz, xx MHz, Time Code, IRIG-B, etc.), and the latest IEEE-1588v2 PTP and NTP/SNTP protocols. In fact, TesCom offers the lowest cost PTP add-on solution available today (plug-in card).

TesCom Timing systems offer a wide range of configurations from fully-redundant to slim systems featuring over 200 output types, and a wide range of AC and DC power modules. Our systems can be managed by Front Panel LCD/Keyboard, Serial Interface, Remote GUI, text commands or SNMP over Ethernet connections.

TesCom Timing is pleased to offer a line of NEBS-class timing distribution systems (SSU), some of which offer integrated GPS. We also offer a separate Primary Reference Source (PRS).

These systems are in use at the largest US and International carriers, and very attractively priced against comparable systems. Carriers are selecting these models to offset the risks of deploying equipment from a single supplier. This ensures equipment availability should a single supplier falter or quote extended lead times for product delivery. A two-vendor strategy is the best hedge against sudden collapse of a supplier.

1 RU- 4 outputs GPS Stratum 1

1.5 RU- 4 outputs GPS Stratum 1

Syncport 32
1 RU- up to 32 outputs, including IEEE-1588 and NTP/SNTP (10/100/1000BASE-T)

Syncport 64
2 RU- up to 64 outputs, IEEE-1588 and NTP/SNTP (10/100/1000BASE-T)

3 RU- up to 104 outputs, IEEE-1588 and NTP/SNTP (10/100/1000BASE-T)


5 RU Mini SSU



Your "MADE IN AMERICA" Timing Company

What Our Timing Products Do For You

From the smallest application to the largest telecom office, TesCom Timing has you covered. Our quality line of MADE IN AMERICA Timing & Synchronization products offers the very latest in advanced, Next-Generation timing for both frequency and IP-based designs (PTP/IEEE-1588 and NTP/SNTP) while providing over 200 output types for legacy network requirements.

If you are replacing a legacy timing system, in many cases you may re-use existing antenna and output cables, resulting in huge savings on installation labor hours and thousands of dollars in reduced cutover costs. Our Timing & Synchronization Engineers can provide expert analysis of your timing needs, perform on-site synchronization surveys, and develop a Sync Plan specific to your network configuration.

How We Help You

TesCom Timing also offers training packages for Planning, Design, Installation and Maintenance of Timing & Synchronization networks. We can provide expert analysis and testing guidance for troubleshooting Timing & Synchronization issues that cause a wide range of network fault and error conditions.

In addition, TesCom also manufactures Halcyon test instruments, with products aimed at troubleshooting timing issues. We are YOUR timing experts. All TesCom & Halcyon branded products are MADE IN THE USA.

Who Are We?

TesCom is the nation's most responsive Timing & Synchronization company. Whether large or small, you are important to us, as we earn your business through unmatched customer service both before and after the sale.

For over 30 years, TesCom has provided mission-critical repair & calibration services of general and telecom test equipment ranging from DC to 50 GHz for top Telephone, Utility, Service and Manufacturing companies nationwide; provided Plug-In Card repair for major and independent carriers; and manufactured centralized and portable network test systems for the telecom industry.

Our engineers have been building and testing telecom networks since 1975. Our Timing & Synchronization equipment is used by mission-critical aerospace, terrestrial, airborne (vehicle and missile), land-mobile and fixed civilian and military communications/telecom and command/control.

When Do We Start?

Call TesCom today and receive immediate, professional attention to your needs. Make TesCom your timing company and leverage our staff as your own. We offer "One Stop Shopping" when you choose TesCom for your Timing/Synchronization, new Test Equipment (analog TIMS, DDS & T1), and test equipment repair and calibration needs. Hire TesCom and stop the finger pointing between vendors.

Click here for our brochure and datasheet